Woven mesh is constructed from high quality stainless steel wires, nickel wires, copper wires, brass wires, Monel wires, Hastelloy wires and other metal wires by using advanced weave technology. It features high temperature resistance, good corrosion resistance, high tensile strength and great abrasion resistance. In addition, its precise opening size also ensures a stable filter rating. As one of the main filter materials, woven mesh can be fabricated into round, belt, cylinder, pleated, and other shape filter elements and are widely used in the separation and filtration of petroleum, chemical, pharmaceuticals, food and other industries.
The simplest and most commonly used type with square openings. It is woven by alternating the weft wire over and under the warp wire. The weft wire and warp wire are in the same diameter, delivering uniform opening sizes. It is often used for weaving coarse mesh and typically serves as the protection layer of coarse filtration and filter media.
Item | Mesh Count | Wire Diameter | Mesh Opening | Open Area | ||
---|---|---|---|---|---|---|
- | Warp/Inch × Weft/Inch | Inch | mm | Inch | mm | % |
BD-P-11 | 1 × 1 | 0.08 | 2.03 | 0.92 | 23.37 | 84.6 |
BD-P-22 | 2 × 2 | 0.063 | 1.6 | 0.437 | 11.1 | 76.4 |
BD-P-33 | 3 × 3 | 0.054 | 1.37 | 0.279 | 7.09 | 70.1 |
BD-P-44 | 4 × 4 | 0.063 | 1.6 | 0.187 | 4.75 | 56 |
BD-P-44 | 4 × 4 | 0.047 | 1.19 | 0.203 | 5.16 | 65.9 |
BD-P-55 | 5 × 5 | 0.041 | 1.04 | 0.159 | 4.04 | 63.2 |
BD-P-66 | 6 × 6 | 0.035 | 0.89 | 0.132 | 3.35 | 62.7 |
BD-P-88 | 8 × 8 | 0.028 | 0.71 | 0.097 | 2.46 | 60.2 |
BD-P-1010 | 10 × 10 | 0.025 | 0.64 | 0.075 | 1.91 | 56.3 |
BD-P-1010 | 10 × 10 | 0.02 | 0.51 | 0.08 | 2.03 | 64 |
BD-P-1212 | 12 × 12 | 0.023 | 0.584 | 0.06 | 1.52 | 51.8 |
BD-P-1212 | 12 × 12 | 0.02 | 0.508 | 0.063 | 1.6 | 57.2 |
BD-P-1414 | 14 × 14 | 0.023 | 0.584 | 0.048 | 1.22 | 45.2 |
BD-P-1414 | 14 × 14 | 0.02 | 0.508 | 0.051 | 1.3 | 51 |
BD-P-1616 | 16 × 16 | 0.018 | 0.457 | 0.0445 | 1.13 | 50.7 |
BD-P-1818 | 18 × 18 | 0.017 | 0.432 | 0.0386 | 0.98 | 48.3 |
BD-P-2020 | 20 × 20 | 0.02 | 0.508 | 0.03 | 0.76 | 36 |
BD-P-2020 | 20 × 20 | 0.016 | 0.406 | 0.034 | 0.86 | 46.2 |
BD-P-2424 | 24 × 24 | 0.014 | 0.356 | 0.0277 | 0.7 | 44.2 |
BD-P-3030 | 30 × 30 | 0.013 | 0.33 | 0.0203 | 0.52 | 37.1 |
BD-P-3030 | 30 × 30 | 0.012 | 0.305 | 0.0213 | 0.54 | 40.8 |
BD-P-3030 | 30 × 30 | 0.009 | 0.229 | 0.0243 | 0.62 | 53.1 |
BD-P-3535 | 35 × 35 | 0.011 | 0.279 | 0.0176 | 0.45 | 37.9 |
BD-P-4040 | 40 × 40 | 0.01 | 0.254 | 0.015 | 0.38 | 36 |
BD-P-5050 | 50 × 50 | 0.009 | 0.229 | 0.011 | 0.28 | 30.3 |
BD-P-5050 | 50 × 50 | 0.008 | 0.203 | 0.012 | 0.31 | 36 |
BD-P-6060 | 60 × 60 | 0.0075 | 0.191 | 0.0092 | 0.23 | 30.5 |
BD-P-6060 | 60 × 60 | 0.007 | 0.178 | 0.0097 | 0.25 | 33.9 |
BD-P-7070 | 70 × 70 | 0.0065 | 0.165 | 0.0078 | 0.2 | 29.8 |
BD-P-8080 | 80 × 80 | 0.0065 | 0.165 | 0.006 | 0.15 | 23 |
BD-P-8080 | 80 × 80 | 0.0055 | 0.14 | 0.007 | 0.18 | 31.4 |
BD-P-9090 | 90 × 90 | 0.005 | 0.127 | 0.0061 | 0.16 | 30.1 |
BD-P-100100 | 100 × 100 | 0.0045 | 0.114 | 0.0055 | 0.14 | 30.3 |
BD-P-100100 | 100 × 100 | 0.004 | 0.102 | 0.006 | 0.15 | 36 |
BD-P-100100 | 100 × 100 | 0.0035 | 0.089 | 0.0065 | 0.17 | 42.3 |
BD-P-110110 | 110 × 110 | 0.004 | 0.1016 | 0.0051 | 0.1295 | 30.7 |
BD-P-120120 | 120 × 120 | 0.0037 | 0.094 | 0.0064 | 0.1168 | 30.7 |
BD-P-150150 | 150 × 150 | 0.0026 | 0.066 | 0.0041 | 0.1041 | 37.4 |
BD-P-160160 | 160 × 160 | 0.0025 | 0.0635 | 0.0038 | 0.0965 | 36.4 |
BD-P-180180 | 180 × 180 | 0.0023 | 0.0584 | 0.0033 | 0.0838 | 34.7 |
BD-P-200200 | 200 × 200 | 0.0021 | 0.0533 | 0.0029 | 0.0737 | 33.6 |
BD-P-250250 | 250 × 250 | 0.0016 | 0.0406 | 0.0024 | 0.061 | 36 |
BD-P-270270 | 270 × 270 | 0.0016 | 0.0406 | 0.0021 | 0.0533 | 32.2 |
BD-P-300300 | 300 × 300 | 0.0051 | 0.0381 | 0.0018 | 0.0457 | 29.7 |
BD-P-325325 | 325 × 325 | 0.0014 | 0.0356 | 0.0017 | 0.0432 | 30 |
BD-P-400400 | 400 × 400 | 0.001 | 0.0254 | 0.0015 | 0.37 | 36 |
Each weft wire passes alternately over and under 2 warp wires, staggered on successive warps. It is generally used for weaving fine mesh and is suitable for fine filtration than plain weave.
Item | Mesh Count | Wire Diameter | Mesh Opening | Open Area |
---|---|---|---|---|
- | Warp/Inch × Weft/Inch | mm | mm | % |
BD-T-150150 | 150 × 150 | 0.07 | 0.0993 | 34.4 |
BD-T-165165 | 165 × 165 | 0.058 | 0.0959 | 38.83 |
BD-T-180180 | 180 × 180 | 0.058 | 0.0831 | 34.69 |
BD-T-200200 | 200 × 200 | 0.058 | 0.069 | 29.52 |
BD-T-225225 | 225 × 225 | 0.05 | 0.069 | 33.62 |
BD-T-235235 | 235 × 235 | 0.045 | 0.0631 | 34.07 |
BD-T-250250 | 250 × 250 | 0.04 | 0.0616 | 36.76 |
BD-T-270270 | 270 × 270 | 0.04 | 0.0541 | 33.05 |
BD-T-280280 | 280 × 280 | 0.04 | 0.0507 | 31.25 |
BD-T-300300 | 300 × 300 | 0.035 | 0.0497 | 34.43 |
BD-T-300300 | 300 × 300 | 0.038 | 0.0467 | 30.4 |
BD-T-300300 | 300 × 300 | 0.04 | 0.0447 | 27.85 |
BD-T-315315 | 315 × 315 | 0.035 | 0.0456 | 32.01 |
BD-T-325325 | 325 × 325 | 0.035 | 0.0432 | 30.52 |
BD-T-350350 | 350 × 350 | 0.035 | 0.0376 | 26.82 |
BD-T-350350 | 350 × 350 | 0.03 | 0.0426 | 34.43 |
BD-T-363363 | 363 × 363 | 0.03 | 0.04 | 32.65 |
BD-T-385385 | 385 × 385 | 0.03 | 0.0377 | 31.01 |
BD-T-400400 | 400 × 400 | 0.025 | 0.0385 | 36.76 |
BD-T-400400 | 400 × 400 | 0.028 | 0.0355 | 31.25 |
BD-T-400400 | 400 × 400 | 0.03 | 0.0335 | 27.83 |
BD-T-420420 | 420 × 420 | 0.03 | 0.0302 | 25.17 |
BD-T-450450 | 450 × 450 | 0.025 | 0.0314 | 31 |
BD-T-500500 | 500 × 500 | 0.025 | 0.0258 | 25.79 |
BD-T-510510 | 510 × 510 | 0.025 | 0.0248 | 24.8 |
BD-T-530530 | 530 × 530 | 0.024 | 0.0239 | 24.9 |
BD-T-635635 | 635 × 635 | 0.018 | 0.022 | 30.25 |
BD-T-635635 | 635 × 635 | 0.02 | 0.02 | 25 |
BD-T-800800 | 800 × 800 | 0.016 | 0.0164 | 25.62 |
Similar to plain weave, but the diameter of the warp wire is bigger than the weft wire. During the weaving process, the finer weft wires are driven closer to form a tight filter medium that has higher filter rating and strength than plain weave. Besides, it also forms tapered or wedge-shaped openings. Typically, coarse mesh works as a reinforcing layer of the metal sintered mesh and the fine mesh as the filtration layer of the metal sintered mesh.
Item | Mesh Count | Wire Diameter | Wire Diameter | Filter Rating | Weight | Weight |
---|---|---|---|---|---|---|
- | Warp/Inch × Weft/Inch | inch | mm | μm | lb/yd2 | kg/m2 |
BD-PD-885 | 8 × 85 | 0.0140 × 0.01260 | 0.355 × 0.320 | 318–340 | 0.497 | 2.43 |
BD-PD-1070 | 10 × 70 | 0.0240 × 0.01400 | 0.600 × 0.350 | 300–325 | 0.622 | 3.04 |
BD-PD-1264 | 12 × 64 | 0.0230 × 0.01650 | 0.580 × 0.400 | 295–305 | 0.744 | 3.64 |
BD-PD-1488 | 14 × 88 | 0.0190 × 0.01200 | 0.500 × 0.330 | 195–205 | 0.644 | 3.15 |
BD-PD-20150 | 20 × 150 | 0.0098 × 0.00700 | 0.248 × 0.177 | 155–165 | 0.303 | 1.48 |
BD-PD-24110 | 24 × 110 | 0.0150 × 0.01000 | 0.355 × 0.250 | 145–155 | 0.552 | 2.7 |
BD-PD-24120 | 24 × 120 | 0.0130 × 0.00900 | 0.330 × 0.230 | 115–125 | 0.458 | 2.24 |
BD-PD-30150 | 30 × 150 | 0.0090 × 0.00700 | 0.230 × 0.180 | 95–105 | 0.327 | 1.6 |
BD-PD-40200 | 40 × 200 | 0.0070 × 0.00550 | 0.180 × 0.140 | 75–85 | 0.266 | 1.3 |
BD-PD-50250 | 50 × 250 | 0.0055 × 0.00450 | 0.140 × 0.114 | 55–65 | 0.204 | 1 |
BD-PD-60300 | 60 × 300 | 0.0055 × 0.00350 | 0.140 × 0.090 | 36–40 | 0.157 | 0.77 |
BD-PD-70400 | 70 × 400 | 0.0047 × 0.00256 | 0.120 × 0.065 | 36–40 | 0.138 | 0.67 |
BD-PD-80300 | 80 × 300 | 0.0049 × 0.00350 | 0.125 × 0.090 | 38–42 | 0.2 | 0.98 |
BD-PD-80400 | 80 × 400 | 0.0049 × 0.00280 | 0.125 × 0.071 | 38–42 | 0.166 | 0.81 |
It combines the Dutch and twill weaving process. Each warp wire passes over and under two fine weft wires. Weft wires are driven closer to each other, forming a tight woven mesh with tapered or wedge-shaped openings. In addition, it also forms smaller opening sizes. Typically, coarse mesh works as a reinforcing layer of the metal sintered mesh and the fine mesh as the filtration layer of the metal sintered mesh.
Item | Mesh Count | Wire Diameter | Wire Diameter | Filter Rating | Weight | Weight |
---|---|---|---|---|---|---|
- | Warp/Inch × Weft/Inch | inch | mm | μm | lb/yd2 | kg/m2 |
BD-TD-20200 | 20 × 200 | 0.0135 × 0.0105 | 0.30 × 0.27 | 138 | 0.804 | 3.93 |
BD-TD-24220 | 24 × 220 | 0.0135 × 0.0100 | 0.30 × 0.25 | 105–112 | 0.814 | 3.98 |
BD-TD-2050 | 20 × 50 | 0.0098 × 0.0079 | 0.25 × 0.20 | 98–105 | 0.575 | 2.81 |
BD-TD-30360 | 30 × 360 | 0.0100 × 0.0060 | 0.02 × 0.15 | 80–84 | 0.509 | 2.49 |
BD-TD-40560 | 40 × 560 | 0.0070 × 0.0040 | 0.18 × 0.10 | 47–52 | 0.352 | 1.72 |
BD-TD-50500 | 50 × 500 | 0.0055 × 0.0043 | 0.14 × 0.11 | 37–45 | 0.36 | 1.76 |
BD-TD-80700 | 80 × 700 | 0.0040 × 0.0030 | 0.10 × 0.08 | 24–26 | 0.27 | 1.32 |
BD-TD-120160 | 120 × 160 | 0.0040 × 0.0025 | 0.10 × 0.063 | 28–32 | 0.094 | 0.46 |
BD-TD-120400 | 120 × 400 | 0.0040 × 0.0025 | 0.10 × 0.063 | 3–43 | 0.143 | 0.7 |
BD-TD-165800 | 165 × 800 | 0.0028 × 0.0020 | 0.071 × 0.05 | 14–16 | 0.148 | 0.72 |
BD-TD-1651400 | 165 × 1400 | 0.0028 × 0.0016 | 0.071 × 0.04 | 9–11 | 0.157 | 0.77 |
BD-TD-200600 | 200 × 600 | 0.0024 × 0.0018 | 0.061 × 0.046 | 19–21 | 0.103 | 0.5 |
BD-TD-2001400 | 200 × 1400 | 0.0028 × 0.0016 | 0.071 × 0.04 | 5–6 | 0.17 | 0.83 |
BD-TD-3252300 | 325 × 2300 | 0.0014 × 0.0010 | 0.035 × 0.025 | 2–3 | 0.094 | 0.46 |
BD-TD-4002800 | 400 × 2800 | 0.0012 × 0.0007 | 0.030 × 0.018 | 1–2 | 0.065 | 0.32 |
It is in a reverse of the plain Dutch weave wire arrangement using larger warp wires and smaller weft wires. It adopts smaller warp wires to offer a tight mesh structure for filtration and larger weft wires deliver higher strength for the woven mesh to extend its service life. Polymer continuous filter belts are generally produced with reverse Dutch weave.
Item | Mesh Count | Wire Diameter | Wire Diameter | Filter Rating | Weight | Weight |
---|---|---|---|---|---|---|
- | Warp/Inch × Weft/Inch | mm | inch | μm | lb/yd2 | kg/m2 |
BD-RD-4810 | 48 × 10 | 0.50 × 0.50 | 0.020 × 0.020 | 400 | 0.742 | 3.63 |
BD-RD-6318 | 63 × 18 | 0.40 × 0.60 | 0.016 × 0.024 | 220 | 0.847 | 4.14 |
BD-RD-7215 | 72 × 15 | 0.45 × 0.55 | 0.018 × 0.022 | 250 | 0.978 | 4.78 |
BD-RD-10016 | 100 × 16 | 0.35 × 0.45 | 0.014 × 0.018 | 190 | 0.791 | 3.87 |
BD-RD-10720 | 107 × 20 | 0.24 × 0.60 | 0.009 × 0.024 | 210 | 0.683 | 3.34 |
BD-RD-12016 | 120 × 16 | 0.35 × 0.45 | 0.014 × 0.018 | 180 | 0.918 | 4.49 |
BD-RD-13217 | 132 × 17 | 0.32 × 0.45 | 0.013 × 0.018 | 170 | 0.867 | 4.24 |
BD-RD-15224 | 152 × 24 | 0.27 × 0.40 | 0.011 × 0.016 | 160 | 0.763 | 3.73 |
BD-RD-16017 | 160 × 17 | 0.27 × 0.45 | 0.011 × 0.018 | 160 | 0.413 | 2.02 |
BD-RD-17018 | 170 × 18 | 0.27 × 0.45 | 0.011 × 0.018 | 160 | 0.826 | 4.01 |
BD-RD-17146 | 171 × 46 | 0.15 × 0.30 | 0.006 × 0.012 | 130 | 0.409 | 2 |
BD-RD-18020 | 180 × 20 | 0.27 × 0.45 | 0.011 × 0.018 | 170 | 0.877 | 4.29 |
BD-RD-20040 | 200 × 40 | 0.17 × 0.27 | 0.007 × 0.011 | 120 | 0.444 | 2.17 |
BD-RD-24040 | 240 × 40 | 0.15 × 0.25 | 0.006 × 0.010 | 70 | 0.405 | 1.98 |
BD-RD-26040 | 260 × 40 | 0.15 × 0.27 | 0.006 × 0.011 | 55 | 0.448 | 2.19 |
BD-RD-29076 | 290 × 76 | 0.09 × 0.19 | 0.004 × 0.007 | 40 | 0.26 | 1.27 |
BD-RD-30040 | 300 × 40 | 0.15 × 0.25 | 0.006 × 0.010 | 50 | 0.472 | 2.31 |
BD-RD-30080 | 300 × 80 | 0.15 × 0.20 | 0.006 × 0.010 | 35 | 0.509 | 2.49 |
Every warp wire alternately up and down each single and four weft wires and vice versa. It provides a rectangular opening and offers high flow rates and good mechanical stability. It is widely used in drainage filtration, undercurrent filtration, and paper-making and chemical packing dehydration.
Item | Mesh Count | Wire Diameter | Thickness | Weight |
---|---|---|---|---|
- | Warp/Inch × Weft/Inch | mm | mm | kg/m2 |
BD-5H-1513 | 15 × 13 | 0.9 × 0.9 | 2.6 | 5.67 |
BD-5H-2420 | 24 × 20 | 0.6 × 0.6 | 1.7 | 3.96 |
BD-5H-2817 | 28 × 17 | 0.47 × 0.47 | 1.41 | 2.53 |
BD-5H-3018 | 30 × 18 | 0.5 × 0.5 | 1.48 | 3 |
BD-5H-4825 | 48 × 25 | 0.3 × 0.3 | 0.82 | 1.64 |
BD-5H-4845 | 48 × 45 | 0.29 × 0.29 | 0.83 | 2 |
BD-5H-5536 | 55 × 36 | 0.3 × 0.3 | 0.84 | 2.05 |
BD-5H-6536 | 65 × 36 | 0.3 × 0.3 | 0.84 | 2.27 |
BD-5H-7740 | 77 × 40 | 0.24 × 0.24 | 0.68 | 1.65 |
BD-5H-8060 | 80 × 60 | 0.2 × 0.2 | 0.55 | 1.4 |
BD-5H-10759 | 107 × 59 | 0.16 × 0.16 | 0.45 | 1.09 |
BD-5H-107125 | 107 × 125 | 0.16 × 0.14 | 0.45 | 1.27 |
BD-5H-107132 | 107 × 132 | 0.16 × 0.14 | 0.44 | 1.3 |
BD-5H-13285 | 132 × 85 | 0.14 × 0.2 | 0.44 | 1.47 |
It includes 304, 304L, 316, 316L and other stainless steel materials, featuring rust resistance, corrosion resistance, acid and alkali resistance, high strength, durable, etc. It is widely used in liquid, gas and solid filtration applications.
It can be fabricated into filter discs, filter tubes and other filter elements or work as the protection layer to protect the main filtration layer.
Item | Mesh/Inch | Wire Diameter | Aperture | Open Area | Weight (LB/100 Square Foot) |
||
---|---|---|---|---|---|---|---|
inch | mm | inch | mm | % | |||
SS-1 | 1 × 1 | 0.0800 | 2.0300 | 0.9200 | 23.3700 | 84.60 | 41.10 |
SS-2 | 2 × 2 | 0.0630 | 1.6000 | 0.4370 | 11.1000 | 76.40 | 51.20 |
SS-3 | 3 × 3 | 0.0540 | 1.3700 | 0.2790 | 7.0900 | 70.10 | 56.70 |
SS-4 | 4 × 4 | 0.0630 | 1.6000 | 0.1870 | 4.7500 | 56.00 | 104.80 |
SS-5 | 4 × 4 | 0.0470 | 1.1900 | 0.2030 | 5.1600 | 65.90 | 57.60 |
SS-6 | 5 × 5 | 0.0410 | 1.0400 | 0.1590 | 4.0400 | 63.20 | 54.90 |
SS-7 | 6 × 6 | 0.0350 | 0.8900 | 0.1320 | 3.3500 | 62.70 | 48.10 |
SS-8 | 8 × 8 | 0.0280 | 0.7100 | 0.0970 | 2.4600 | 60.20 | 41.10 |
SS-9 | 10 × 10 | 0.0250 | 0.6400 | 0.0750 | 1.9100 | 56.30 | 41.20 |
SS-10 | 10 × 10 | 0.0200 | 0.5100 | 0.0800 | 2.0300 | 64.00 | 26.10 |
SS-11 | 12 × 12 | 0.0230 | 0.5840 | 0.0600 | 1.5200 | 51.80 | 42.20 |
SS-12 | 12 × 12 | 0.0200 | 0.5080 | 0.0630 | 1.6000 | 57.20 | 31.60 |
SS-13 | 14 × 14 | 0.0230 | 0.5840 | 0.0480 | 1.2200 | 45.20 | 49.80 |
SS-14 | 14 × 14 | 0.0200 | 0.5080 | 0.0510 | 1.3000 | 51.00 | 37.20 |
SS-15 | 16 × 16 | 0.0180 | 0.4570 | 0.0445 | 1.1300 | 50.70 | 34.50 |
SS-16 | 18 × 18 | 0.0170 | 0.4320 | 0.0386 | 0.9800 | 48.30 | 34.80 |
SS-17 | 20 × 20 | 0.0200 | 0.5080 | 0.0300 | 0.7600 | 36.00 | 55.20 |
SS-18 | 20 × 20 | 0.0160 | 0.4060 | 0.0340 | 0.8600 | 46.20 | 34.40 |
SS-19 | 24 × 24 | 0.0140 | 0.3560 | 0.0277 | 0.7000 | 44.20 | 31.80 |
SS-20 | 30 × 30 | 0.0130 | 0.3300 | 0.0203 | 0.5200 | 37.10 | 34.80 |
SS-21 | 30 × 30 | 0.0120 | 0.3050 | 0.0213 | 0.5400 | 40.80 | 29.40 |
SS-22 | 30 × 30 | 0.0090 | 0.2290 | 0.0243 | 0.6200 | 53.10 | 16.10 |
SS-23 | 35 × 35 | 0.0110 | 0.2790 | 0.0176 | 0.4500 | 37.90 | 29.00 |
SS-24 | 40 × 40 | 0.0100 | 0.2540 | 0.0150 | 0.3800 | 36.00 | 27.60 |
SS-25 | 50 × 50 | 0.0090 | 0.2290 | 0.0110 | 0.2800 | 30.30 | 28.40 |
SS-26 | 50 × 50 | 0.0080 | 0.2030 | 0.0120 | 0.3100 | 36.00 | 22.10 |
SS-27 | 60 × 60 | 0.0075 | 0.1910 | 0.0092 | 0.2300 | 30.50 | 23.70 |
SS-28 | 60 × 60 | 0.0070 | 0.1780 | 0.0097 | 0.2500 | 33.90 | 20.40 |
SS-29 | 70 × 70 | 0.0065 | 0.1650 | 0.0078 | 0.2000 | 29.80 | 20.80 |
SS-30 | 80 × 80 | 0.0065 | 0.1650 | 0.0060 | 0.1500 | 23.00 | 23.20 |
SS-31 | 80 × 80 | 0.0055 | 0.1400 | 0.0070 | 0.1800 | 31.40 | 16.90 |
SS-32 | 90 × 90 | 0.0050 | 0.1270 | 0.0061 | 0.1600 | 30.10 | 15.80 |
SS-33 | 100 × 100 | 0.0045 | 0.1140 | 0.0055 | 0.1400 | 30.30 | 14.20 |
SS-34 | 100 × 100 | 0.0040 | 0.1020 | 0.0060 | 0.1500 | 36.00 | 11.00 |
SS-35 | 100 × 100 | 0.0035 | 0.0890 | 0.0065 | 0.1700 | 42.30 | 8.30 |
SS-36 | 110 × 110 | 0.0040 | 0.1016 | 0.0051 | 0.1295 | 30.70 | 12.40 |
SS-37 | 120 × 120 | 0.0037 | 0.0940 | 0.0064 | 0.1168 | 30.70 | 11.60 |
SS-38 | 150 × 150 | 0.0026 | 0.0660 | 0.0041 | 0.1041 | 37.40 | 7.10 |
SS-39 | 160 × 160 | 0.0025 | 0.0635 | 0.0038 | 0.0965 | 36.40 | 5.94 |
SS-40 | 180 × 180 | 0.0023 | 0.0584 | 0.0033 | 0.0838 | 34.70 | 6.70 |
SS-41 | 200 × 200 | 0.0021 | 0.0533 | 0.0029 | 0.0737 | 33.60 | 6.20 |
SS-42 | 250 × 250 | 0.0016 | 0.0406 | 0.0024 | 0.0610 | 36.00 | 4.40 |
SS-43 | 270 × 270 | 0.0016 | 0.0406 | 0.0021 | 0.0533 | 32.20 | 4.70 |
SS-44 | 300 × 300 | 0.0051 | 0.0381 | 0.0018 | 0.0457 | 29.70 | 3.04 |
SS-45 | 325 × 325 | 0.0014 | 0.0356 | 0.0017 | 0.0432 | 30.00 | 4.40 |
SS-46 | 400 × 400 | 0.0010 | 0.0254 | 0.0015 | 0.3700 | 36.00 | 3.30 |
SS-47 | 500 × 500 | 0.0010 | 0.0254 | 0.0010 | 0.0254 | 25.00 | 3.80 |
SS-48 | 635 × 635 | 0.0008 | 0.0203 | 0.0008 | 0.0203 | 25.00 | 2.63 |
It is 99.8% purity, featuring acid and alkali resistance, wear resistance, non-magnetic, sound insulation and good ductility.
It can be used as shielding screen in the circuits, laboratories and computer rooms. Shielding effectiveness calculator also illustrates the difference between copper wire meshes at various radio frequencies. In addition, it can be installed on buildings for sound insulation or is fabricated into polymer extruder screen for polymer filtration.
Item | Mesh Count (Warp × Weft) |
Wire Diameter | Mesh Opening | Open Area | ||
---|---|---|---|---|---|---|
inch | mm | inch | mm | % | ||
copper-1 | 1 × 1 | 0.0800 | 2.0300 | 0.9200 | 23.370 | 85 |
copper-2 | 1 × 1 | 0.1180 | 3.0000 | 0.8820 | 22.400 | 78 |
copper-3 | 2 × 2 | 0.0630 | 1.6000 | 0.4370 | 11.100 | 76 |
copper-4 | 2 × 2 | 0.0590 | 1.5000 | 0.4410 | 11.200 | 78 |
copper-5 | 3 × 3 | 0.0540 | 1.3700 | 0.2790 | 7.090 | 70 |
copper-6 | 3 × 3 | 0.0470 | 1.2000 | 0.2860 | 7.270 | 74 |
copper-7 | 4 × 4 | 0.0390 | 1.0000 | 0.2110 | 5.350 | 71 |
copper-8 | 4 × 4 | 0.0470 | 1.1900 | 0.2030 | 5.160 | 66 |
copper-9 | 4 × 4 | 0.0630 | 1.6000 | 0.1870 | 4.750 | 56 |
copper-10 | 5 × 5 | 0.0390 | 1.0000 | 0.1610 | 4.080 | 65 |
copper-11 | 5 × 5 | 0.0410 | 1.0400 | 0.1590 | 4.040 | 63 |
copper-12 | 6 × 6 | 0.0350 | 0.9000 | 0.1310 | 3.330 | 62 |
copper-13 | 6 × 6 | 0.0350 | 0.8900 | 0.1320 | 3.350 | 62 |
copper-14 | 7 × 7 | 0.0310 | 0.8000 | 0.1110 | 2.830 | 61 |
copper-15 | 8 × 8 | 0.0280 | 0.7100 | 0.0970 | 2.460 | 60 |
copper-16 | 10 × 10 | 0.0250 | 0.6400 | 0.0750 | 1.910 | 56 |
copper-17 | 10 × 10 | 0.0240 | 0.6000 | 0.0760 | 1.940 | 58 |
copper-18 | 12 × 12 | 0.0230 | 0.5840 | 0.0600 | 1.520 | 52 |
copper-19 | 12 × 12 | 0.0200 | 0.5080 | 0.0630 | 1.600 | 58 |
copper-20 | 12 × 12 | 0.0220 | 0.5500 | 0.0620 | 1.570 | 55 |
copper-21 | 14 × 14 | 0.0230 | 0.5840 | 0.0480 | 1.220 | 46 |
copper-22 | 14 × 14 | 0.0200 | 0.5080 | 0.0510 | 1.300 | 52 |
copper-23 | 16 × 16 | 0.0180 | 0.4570 | 0.0445 | 1.130 | 51 |
copper-24 | 16 × 16 | 0.0200 | 0.5000 | 0.0430 | 1.090 | 47 |
copper-25 | 18 × 18 | 0.0170 | 0.4320 | 0.0386 | 0.980 | 48 |
copper-26 | 18 × 18 | 0.0200 | 0.5000 | 0.0360 | 0.910 | 42 |
copper-27 | 20 × 20 | 0.0200 | 0.5080 | 0.0300 | 0.760 | 36 |
copper-28 | 20 × 20 | 0.0160 | 0.4060 | 0.0340 | 0.860 | 46 |
copper-29 | 20 × 20 | 0.0160 | 0.4000 | 0.0340 | 0.870 | 47 |
copper-30 | 20 × 20 | 0.0180 | 0.4500 | 0.0320 | 0.820 | 42 |
copper-31 | 24 × 24 | 0.0140 | 0.3560 | 0.0277 | 0.700 | 44 |
copper-32 | 24 × 24 | 0.0140 | 0.3500 | 0.0280 | 0.710 | 45 |
copper-33 | 30 × 30 | 0.0130 | 0.3300 | 0.0203 | 0.520 | 37 |
copper-34 | 30 × 30 | 0.0120 | 0.3050 | 0.0213 | 0.540 | 41 |
copper-35 | 30 × 30 | 0.0090 | 0.2290 | 0.0243 | 0.620 | 53 |
copper-36 | 30 × 30 | 0.0100 | 0.2500 | 0.0230 | 0.600 | 50 |
copper-37 | 40 × 40 | 0.0100 | 0.2540 | 0.0150 | 0.380 | 36 |
copper-38 | 40 × 40 | 0.0080 | 0.2000 | 0.0170 | 0.440 | 47 |
copper-39 | 50 × 50 | 0.0090 | 0.2290 | 0.0110 | 0.280 | 30 |
copper-40 | 50 × 50 | 0.0080 | 0.2030 | 0.0120 | 0.310 | 37 |
copper-41 | 50 × 50 | 0.0070 | 0.1800 | 0.0130 | 0.330 | 42 |
copper-42 | 60 × 60 | 0.0075 | 0.1910 | 0.0092 | 0.230 | 30 |
copper-43 | 60 × 60 | 0.0070 | 0.1780 | 0.0097 | 0.250 | 34 |
copper-44 | 60 × 60 | 0.0060 | 0.1600 | 0.0100 | 0.260 | 38 |
copper-45 | 60 × 60 | 0.0070 | 0.1900 | 0.0090 | 0.230 | 30 |
copper-46 | 70 × 70 | 0.0065 | 0.1650 | 0.0078 | 0.200 | 30 |
copper-47 | 70 × 70 | 0.0050 | 0.1200 | 0.0100 | 0.240 | 44 |
copper-48 | 80 × 80 | 0.0065 | 0.1650 | 0.0060 | 0.150 | 23 |
copper-49 | 80 × 80 | 0.0050 | 0.1200 | 0.0080 | 0.200 | 39 |
copper-50 | 80 × 80 | 0.0050 | 0.1300 | 0.0070 | 0.190 | 35 |
copper-51 | 90 × 90 | 0.0050 | 0.1270 | 0.0061 | 0.160 | 31 |
copper-52 | 100 × 100 | 0.0045 | 0.1140 | 0.0055 | 0.140 | 30 |
copper-53 | 100 × 100 | 0.0040 | 0.1020 | 0.0060 | 0.150 | 35 |
copper-54 | 100 × 100 | 0.0035 | 0.0890 | 0.0065 | 0.170 | 43 |
copper-55 | 100 × 100 | 0.0040 | 0.1000 | 0.0080 | 0.150 | 36 |
copper-56 | 100 × 100 | 0.0040 | 0.1100 | 0.0060 | 0.140 | 31 |
copper-57 | 110 × 110 | 0.0040 | 0.1020 | 0.0051 | 0.130 | 31 |
copper-58 | 120 × 120 | 0.0037 | 0.0940 | 0.0064 | 0.120 | 31 |
copper-59 | 120 × 120 | 0.0020 | 0.0600 | 0.0070 | 0.180 | 56 |
copper-60 | 120 × 120 | 0.0040 | 0.0900 | 0.0050 | 0.120 | 33 |
copper-61 | 120 × 120 | 0.0020 | 0.0580 | 0.0080 | 0.150 | 52 |
copper-62 | 120 × 120 | 0.0030 | 0.0800 | 0.0050 | 0.130 | 38 |
copper-63 | 140 × 140 | 0.0030 | 0.0700 | 0.0040 | 0.110 | 37 |
copper-64 | 145 × 145 | 0.0020 | 0.0450 | 0.0050 | 0.130 | 55 |
copper-65 | 150 × 150 | 0.0026 | 0.0660 | 0.0041 | 0.100 | 37 |
copper-66 | 150 × 150 | 0.0020 | 0.0600 | 0.0040 | 0.110 | 42 |
copper-67 | 150 × 150 | 0.0020 | 0.0500 | 0.0050 | 0.120 | 50 |
copper-68 | 160 × 160 | 0.0025 | 0.0640 | 0.0038 | 0.100 | 36 |
copper-69 | 160 × 160 | 0.0020 | 0.0500 | 0.0040 | 0.110 | 47 |
copper-70 | 160 × 160 | 0.0020 | 0.0400 | 0.0050 | 0.120 | 56 |
copper-71 | 160 × 160 | 0.0010 | 0.0350 | 0.0050 | 0.120 | 60 |
copper-72 | 165 × 165 | 0.0020 | 0.0500 | 0.0040 | 0.100 | 44 |
copper-73 | 180 × 180 | 0.0023 | 0.0580 | 0.0033 | 0.080 | 35 |
copper-74 | 180 × 180 | 0.0020 | 0.0500 | 0.0040 | 0.090 | 41 |
copper-75 | 180 × 180 | 0.0020 | 0.0400 | 0.0040 | 0.100 | 51 |
copper-76 | 200 × 200 | 0.0021 | 0.0530 | 0.0029 | 0.070 | 34 |
copper-77 | 200 × 200 | 0.0020 | 0.0530 | 0.0030 | 0.070 | 32 |
copper-78 | 200 × 200 | 0.0020 | 0.0500 | 0.0030 | 0.080 | 38 |
copper-79 | 200 × 200 | 0.0020 | 0.0400 | 0.0030 | 0.090 | 48 |
copper-80 | 220 × 220 | 0.0020 | 0.0500 | 0.0030 | 0.070 | 34 |
copper-81 | 230 × 230 | 0.0010 | 0.0350 | 0.0030 | 0.080 | 48 |
copper-82 | 230 × 230 | 0.0010 | 0.0300 | 0.0030 | 0.080 | 53 |
copper-83 | 250 × 250 | 0.0016 | 0.0410 | 0.0024 | 0.060 | 36 |
copper-84 | 250 × 250 | 0.0020 | 0.0400 | 0.0020 | 0.060 | 36 |
copper-85 | 250 × 250 | 0.0010 | 0.0350 | 0.0030 | 0.070 | 44 |
copper-86 | 250 × 250 | 0.0010 | 0.0300 | 0.0030 | 0.070 | 49 |
copper-87 | 270 × 270 | 0.0016 | 0.0410 | 0.0021 | 0.050 | 32 |
copper-88 | 270 × 270 | 0.0010 | 0.0350 | 0.0020 | 0.060 | 40 |
copper-89 | 270 × 270 | 0.0010 | 0.0300 | 0.0030 | 0.060 | 44 |
copper-90 | 280 × 280 | 0.0010 | 0.0350 | 0.0020 | 0.060 | 40 |
copper-91 | 300 × 300 | 0.0051 | 0.0380 | 0.0018 | 0.050 | 30 |
copper-92 | 300 × 300 | 0.0010 | 0.0300 | 0.0020 | 0.050 | 39 |
copper-93 | 315 × 315 | 0.0350 | 0.0010 | 0.0456 | 0.002 | 32 |
copper-94 | 325 × 325 | 0.0014 | 0.0360 | 0.0017 | 0.043 | 30 |
copper-95 | 325 × 325 | 0.0350 | 0.0010 | 0.0432 | 0.002 | 30 |
copper-96 | 350 × 350 | 0.0350 | 0.0010 | 0.0376 | 0.002 | 27 |
copper-97 | 350 × 350 | 0.0300 | 0.0010 | 0.0426 | 0.002 | 34 |
copper-98 | 363 × 363 | 0.0300 | 0.0010 | 0.0400 | 0.002 | 33 |
copper-99 | 400 × 400 | 0.0010 | 0.0250 | 0.0015 | 0.370 | 88 |
copper-100 | 400 × 400 | 0.0250 | 0.0010 | 0.0385 | 0.002 | 36 |
copper-101 | 400 × 400 | 0.0280 | 0.0010 | 0.0355 | 0.001 | 31 |
copper-102 | 400 × 400 | 0.0300 | 0.0010 | 0.0335 | 0.001 | 27 |
It contains 65% copper and 35% zinc, featuring excellent filtration performance, bright color and smooth surface.
It can be as filtration materials, such as the filter disc or filter tube in the chemical, pharmacy and other fields, or used in paper-making dewatering, or used as the insect screen or window screen in home, hotel and other places.
Item | Mesh (wires/in.) |
Wire Diameter (in.) |
Width of Opening (in) |
Open Area (%) |
---|---|---|---|---|
brass-1 | 2 × 2 | 0.0630 | 0.437 | 76.4 |
brass-2 | 3 × 3 | 0.0630 | 0.270 | 65.6 |
brass-3 | 4 × 4 | 0.0630 | 0.187 | 56.0 |
brass-4 | 4 × 4 | 0.0470 | 0.203 | 65.9 |
brass-5 | 6 × 6 | 0.0350 | 0.132 | 62.7 |
brass-6 | 8 × 8 | 0.0280 | 0.097 | 60.2 |
brass-7 | 10 × 10 | 0.0250 | 0.075 | 56.3 |
brass-8 | 12 × 12 | 0.0230 | 0.060 | 51.8 |
brass-9 | 14 × 14 | 0.0200 | 0.051 | 51.0 |
brass-10 | 16 × 16 | 0.0180 | 0.045 | 50.7 |
brass-11 | 18 × 18 | 0.0170 | 0.039 | 48.3 |
brass-12 | 20 × 20 | 0.0160 | 0.034 | 46.2 |
brass-13 | 24 × 24 | 0.0140 | 0.028 | 44.2 |
brass-14 | 30 × 30 | 0.0130 | 0.020 | 37.1 |
brass-15 | 40 × 40 | 0.0100 | 0.015 | 36.0 |
brass-16 | 50 × 50 | 0.0090 | 0.011 | 30.3 |
brass-17 | 60 × 60 | 0.0075 | 0.009 | 30.5 |
brass-18 | 80 × 80 | 0.0055 | 0.007 | 31.4 |
brass-19 | 100 × 100 | 0.0045 | 0.006 | 30.3 |
It is a sliver-white metal with high electrical conductivity, thermal conductivity, ductility and corrosion resistance. Nickel woven mesh is constructed from nickel wires with high purity not less than 99%.
Nickel woven mesh plays an very important role in the fields of electrolytic hydrogen production, new energy and fuel cell technology and is widely used as filter materials in mining, oil, chemical, food, pharmaceutical and mechanical industries.
Item | Mesh Count | Wire Diameter (in.) |
Weave Type | Width Opening (in.) |
Open Area (%) |
---|---|---|---|---|---|
NI200-1 | 8 × 8 | 0.0280 | Plain | 0.0970 | 60.20 |
NI200-2 | 10 × 10 | 0.0200 | Plain | 0.0800 | 64.00 |
NI200-3 | 12 × 12 | 0.0140 | Plain | 0.0693 | 69.20 |
NI200-4 | 16 × 16 | 0.0120 | Plain | 0.0505 | 65.30 |
NI200-5 | 16 × 16 | 0.0140 | Plain | 0.0485 | 60.20 |
NI200-6 | 20 × 20 | 0.0045 | Plain | 0.0455 | 82.80 |
NI200-7 | 20 × 20 | 0.0070 | Plain | 0.0430 | 74.00 |
NI200-8 | 20 × 20 | 0.0140 | Plain | 0.0360 | 51.80 |
NI200-9 | 25 × 25 | 0.0060 | Plain | 0.0190 | 57.80 |
NI200-10 | 26 × 26 | 0.0100 | Plain | 0.0285 | 54.80 |
NI200-11 | 30 × 30 | 0.0130 | Plain | 0.0203 | 37.20 |
NI200-12 | 40 × 40 | 0.0060 | Plain | 0.0190 | 57.80 |
NI200-13 | 40 × 40 | 0.0100 | Plain | 0.0150 | 36.00 |
NI200-14 | 50 × 50 | 0.0020 | Plain | 0.0180 | 81.00 |
NI200-15 | 60 × 60 | 0.0070 | Plain | 0.0097 | 33.60 |
NI200-16 | 60 × 60 | 0.0105 | Twill | 0.0062 | 13.70 |
NI200-17 | 60 × 60 | 0.0100 | Twill | 0.0057 | 11.60 |
NI200-18 | 70 × 70 | 0.0040 | Plain | 0.0103 | 51.80 |
NI200-19 | 70 × 70 | 0.0045 | Plain | 0.0098 | 46.90 |
NI200-20 | 70 × 70 | 0.0080 | Twill | 0.0063 | 19.40 |
NI200-21 | 80 × 80 | 0.0055 | Twill | 0.0070 | 31.40 |
NI200-22 | 85 × 70 | 0.0060 | Plain | 0.0000 | 28.40 |
NI200-23 | 100 × 100 | 0.0020 | Plain | 0.0080 | 64.00 |
NI200-24 | 100 × 100 | 0.0040 | Plain | 0.0060 | 36.00 |
NI200-25 | 100 × 100 | 0.0045 | Plain | 0.0060 | 30.30 |
NI200-26 | 200 × 200 | 0.0018 | Plain | 0.0032 | 41.00 |
Item | Mesh Count | Wire Diameter (in.) |
Type Weave | Width Opening (in.) |
Open Area (%) |
---|---|---|---|---|---|
NI205-1 | 60 × 60 | 0.0060 | Plain | 0.0107 | 41.00 |
Item | Mesh Count | Wire Diameter (in.) |
Type Weave | Width Opening (in.) |
Open Area (%) |
---|---|---|---|---|---|
NI270-1 | 50 × 50 | 0.0670 | plain | 0.0133 | 44.2 |
NI270-2 | 60 × 60 | 0.0040 | Plain | 0.0127 | 57.8 |
NI270-3 | 60 × 60 | 0.0060 | Plain | 0.0107 | 41.0 |
NI270-4 | 60 × 60 | 0.0070 | Plain | 0.0097 | 33.6 |
NI270-5 | 75 × 75 | 0.0060 | Plain | 0.0073 | 30.3 |
It is divided into Monel alloy 400 and Monel alloy K500. Alloy 400 has outstanding corrosion resistance performance while alloy K500 has higher tensile strength and hardness than Monel alloy 400 due to the addition of aluminum.
Monel woven mesh has excellent corrosion resistance performance and is widely used in the marine industries, such as the piping system and strainer baskets. It can also be used in petrochemical industries.
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
Monel-1 | 8 × 8 | 0.0280 | 0.0970 | 60.2 |
Monel-2 | 10 × 10 | 0.0250 | 0.0750 | 56.3 |
Monel-3 | 12 × 12 | 0.0230 | 0.0600 | 51.8 |
Monel-4 | 20 × 20 | 0.0160 | 0.0340 | 46.2 |
Monel-5 | 30 × 30 | 0.0130 | 0.0203 | 37.2 |
Monel-6 | 40 × 40 | 0.0100 | 0.0150 | 36.0 |
Monel-7 | 60 × 60 | 0.0072 | 0.0090 | 30.5 |
Monel-8 | 80 × 80 | 0.0055 | 0.0070 | 31.4 |
Monel-9 | 100 × 100 | 0.0045 | 0.0060 | 30.3 |
Monel-10 | 120 × 120 | 0.0036 | 0.0047 | 32.3 |
Monel-11 | 150 × 150 | 0.0026 | 0.0041 | 37.2 |
Monel-12 | 200 × 200 | 0.0021 | 0.0533 | 33.6 |
It is an alloy of nickel, molybdenum and chromium. It is the best corrosion resistant materials among all metal materials and has great chemical stability.
It is widely used in drugs manufacturing, chlorination devices, pesticide processing, incineration scrubber apparatus, etc.
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
HB-01 | 16 × 16 | 0.0140 | 0.0490 | 60.2 |
HB-02 | 30 × 30 | 0.0085 | 0.0250 | 55.4 |
HB-03 | 30 × 30 | 0.0106 | 0.0227 | 46.5 |
HB-04 | 60 × 60 | 0.0072 | 0.0090 | 30.5 |
HB-05 | 200 × 200 | 0.0020 | 0.0030 | 36.0 |
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
HC276-01 | 6 × 6 | 0.0470 | 0.1200 | 51.8 |
HC276-02 | 8 × 8 | 0.0320 | 0.0930 | 55.4 |
HC276-03 | 10 × 10 | 0.0250 | 0.0750 | 56.3 |
HC276-04 | 12 × 12 | 0.0230 | 0.0600 | 51.8 |
HC276-05 | 12 × 12 | 0.0160 | 0.0670 | 64.5 |
HC276-06 | 12 × 12 | 0.0150 | 0.0680 | 66.6 |
HC276-07 | 14 × 14 | 0.0200 | 0.0510 | 51.0 |
HC276-08 | 16 × 16 | 0.0180 | 0.0450 | 50.7 |
HC276-09 | 16 × 16 | 0.0090 | 0.0535 | 73.3 |
HC276-10 | 20 × 20 | 0.0230 | 0.0270 | 29.2 |
HC276-11 | 20 × 20 | 0.0160 | 0.0340 | 46.2 |
HC276-12 | 20 × 20 | 0.0090 | 0.0410 | 67.2 |
HC276-13 | 24 × 24 | 0.0140 | 0.0280 | 44.2 |
HC276-14 | 30 × 30 | 0.0130 | 0.0200 | 37.1 |
HC276-15 | 30 × 30 | 0.0090 | 0.0240 | 53.1 |
HC276-16 | 40 × 40 | 0.0100 | 0.0150 | 36.0 |
HC276-17 | 40 × 40 | 0.0090 | 0.0160 | 41.0 |
HC276-18 | 40 × 40 | 0.0075 | 0.0180 | 49.0 |
HC276-19 | 50 × 50 | 0.0090 | 0.0110 | 30.3 |
HC276-20 | 60 × 60 | 0.0072 | 0.0090 | 30.5 |
HC276-21 | 60 × 60 | 0.0044 | 0.0123 | 54.2 |
HC276-22 | 80 × 80 | 0.0070 | 0.0060 | 19.4 |
HC276-23 | 80 × 80 | 0.0010 | 0.0085 | 46.2 |
HC276-24 | 100 × 100 | 0.0010 | 0.0060 | 36.0 |
HC276-25 | 120 × 120 T | 0.0040 | 0.0043 | 27.0 |
HC276-26 | 180 × 180 | 0.0020 | 0.0036 | 41.0 |
HC276-27 | 200 × 200 | 0.0023 | 0.0027 | 48.0 |
HC276-28 | 200 × 200 | 0.0020 | 0.0030 | 36.0 |
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
HX-01 | 10 × 10 | 0.0250 | 0.0750 | 56.3 |
HX-02 | 18 × 18 | 0.0090 | 0.0470 | 70.4 |
HX-03 | 20 × 20 | 0.0160 | 0.0340 | 46.2 |
HX-04 | 50 × 50 | 0.0030 | 0.0170 | 72.3 |
HX-05 | 60 × 60 | 0.0075 | 0.0090 | 30.5 |
Inconel woven mesh is a kind of woven mesh made of oxidization-corrosion-resistant alloy wires that are nickel-based and added with iron, chromium and other alloy elements. It has excellent corrosion resistance and oxidization resistance and can be used in a temperature ranging from below zero to 1093 °C without magnetism. In addition, it is widely used in petrochemical, aerospace and other industries.
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
Inconel600-1 | 4 × 4 | 0.1200 | 0.1300 | 27.0 |
Inconel600-2 | 4 × 4 | 0.0800 | 0.1700 | 46.2 |
Inconel600-3 | 4 × 4 | 0.0630 | 0.1870 | 56.0 |
Inconel600-4 | 5 × 5 | 0.0400 | 0.1600 | 64.0 |
Inconel600-5 | 6 × 6 | 0.0410 | 0.0126 | 57.2 |
Inconel600-6 | 8 ×8 | 0.0470 | 0.0780 | 38.9 |
Inconel600-7 | 8 × 8 | 0.0410 | 0.0840 | 45.2 |
Inconel600-8 | 8 × 8 | 0.0300 | 0.0950 | 57.8 |
Inconel600-9 | 8 × 8 | 0.0280 | 0.0970 | 60.2 |
Inconel600-10 | 10 × 10 | 0.0225 | 0.0750 | 56.3 |
Inconel600-11 | 10 × 10 | 0.0150 | 0.0850 | 72.3 |
Inconel600-12 | 12 × 12 | 0.0410 | 0.0420 | 25.4 |
Inconel600-13 | 12 × 12 | 0.0250 | 0.0580 | 48.4 |
Inconel600-14 | 16 × 16 | 0.0360 | 0.0275 | 19.4 |
Inconel600-15 | 16 × 16 | 0.0280 | 0.0350 | 30.5 |
Inconel600-16 | 16 × 16 | 0.0250 | 0.0380 | 36.0 |
Inconel600-17 | 16 × 16 | 0.0230 | 0.0400 | 39.9 |
Inconel600-18 | 16 × 16 | 0.0180 | 0.0450 | 50.7 |
Inconel600-19 | 18 × 18 | 0.0280 | 0.0280 | 24.7 |
Inconel600-20 | 20 × 20 | 0.0160 | 0.0340 | 46.2 |
Inconel600-21 | 22 × 22 | 0.0150 | 0.0310 | 45.0 |
Inconel600-22 | 24 × 24 | 0.0140 | 0.0280 | 44.2 |
Inconel600-23 | 24 × 24 | 0.0120 | 0.0300 | 50.8 |
Inconel600-24 | 28 × 28 | 0.0130 | 0.0230 | 40.4 |
Inconel600-25 | 30 × 30 | 0.0150 | 0.0180 | 30.1 |
Inconel600-26 | 30 × 30 | 0.0100 | 0.0233 | 48.9 |
Inconel600-27 | 35 × 35 | 0.0055 | 0.0236 | 68.1 |
Inconel600-28 | 40 × 40 | 0.0100 | 0.0150 | 36.0 |
Inconel600-29 | 50 × 50 | 0.0090 | 0.0110 | 30.2 |
Inconel600-30 | 60 × 60 | 0.0075 | 0.0092 | 30.5 |
Inconel600-31 | 80 × 80 | 0.0055 | 0.0070 | 31.4 |
Inconel600-32 | 100 × 100 | 0.0040 | 0.0060 | 36.0 |
Inconel600-33 | 100 × 100 | 0.0045 | 0.0055 | 30.2 |
Inconel600-34 | 120 × 120 | 0.0038 | 0.0046 | 30.7 |
Inconel600-35 | 120 × 120 | 0.0020 | 0.0063 | 57.8 |
Inconel600-36 | 200 × 200 | 0.0021 | 0.0029 | 33.6 |
Inconel600-37 | 200 × 200 | 0.0020 | 0.0030 | 36.0 |
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
Inconel601-1 | 2 × 2 | 0.0720 | 0.4280 | 73.3 |
Inconel601-2 | 5 × 5 | 0.0410 | 0.1590 | 63.2 |
Inconel601-3 | 6 × 6 | 0.0470 | 0.1200 | 51.8 |
Inconel601-4 | 10 × 10 | 0.0470 | 0.0530 | 28.1 |
Inconel601-5 | 10 × 10 | 0.0225 | 0.0750 | 56.3 |
Inconel601-6 | 10 × 10 | 0.0150 | 0.0850 | 72.3 |
Inconel601-7 | 12 × 12 | 0.0250 | 0.0580 | 48.4 |
Inconel601-8 | 18 × 18 | 0.0170 | 0.0390 | 48.3 |
Inconel601-9 | 24 × 24 | 0.0140 | 0.0280 | 44.2 |
Inconel601-10 | 30 × 30 TW | 0.0170 | 0.0163 | 23.9 |
Inconel601-11 | 30 × 30 | 0.0160 | 0.0170 | 26.9 |
Inconel601-12 | 30 × 30 | 0.0150 | 0.0180 | 30.1 |
Inconel601-13 | 35 × 35 | 0.0100 | 0.0190 | 42.4 |
Inconel601-14 | 35 × 35 | 0.0140 | 0.0150 | 26.1 |
Inconel601-15 | 40 × 40 | 0.0100 | 0.0150 | 36.0 |
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
Inconel625-1 | 4 × 4 | 0.0470 | 0.2030 | 65.90 |
Inconel625-2 | 6 × 6 | 0.0410 | 0.0126 | 57.20 |
Inconel625-3 | 8 ×8 | 0.0350 | 0.0900 | 51.80 |
Inconel625-4 | 8 × 8 | 0.0320 | 0.0930 | 55.40 |
Inconel625-5 | 8 × 8 | 0.0240 | 0.1010 | 65.29 |
Inconel625-6 | 20 × 20 | 0.0115 | 0.0390 | 60.80 |
Inconel625-7 | 26 × 26 | 0.0130 | 0.0260 | 44.00 |
Inconel625-8 | 30 × 30 | 0.0120 | 0.0210 | 40.80 |
Inconel625-9 | 32 × 32 | 0.0140 | 0.0170 | 30.60 |
Inconel625-10 | 32 × 32 | 0.0130 | 0.0180 | 34.30 |
Inconel625-11 | 32 × 32 | 0.0100 | 0.0210 | 46.50 |
Inconel625-12 | 35 × 35 | 0.0140 | 0.0150 | 26.10 |
Inconel625-13 | 35 × 35 | 0.0135 | 0.0150 | 27.90 |
Inconel625-14 | 35 × 35 | 0.0100 | 0.0190 | 42.40 |
Inconel625-15 | 40 × 40 | 0.0105 | 0.0145 | 33.65 |
Inconel625-16 | 40 × 40 | 0.0085 | 0.0170 | 43.60 |
Inconel625-17 | 50 × 50 | 0.0090 | 0.0110 | 30.30 |
Inconel625-18 | 60 × 60 | 0.0075 | 0.0090 | 30.50 |
Inconel625-19 | 100 × 100 | 0.0040 | 0.0060 | 36.00 |
Inconel625-20 | 100 × 100 | 0.0045 | 0.0060 | 30.30 |
Inconel625-21 | 100 × 100 | 0.0040 | 0.0060 | 36.00 |
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
Inconel718-1 | 10 × 10 | 0.0200 | 0.0800 | 64.0 |
Inconel718-2 | 26 × 26 | 0.0130 | 0.0260 | 44.0 |
Inconel718-3 | 30 × 30 | 0.0080 | 0.0250 | 57.6 |
Inconel718-4 | 45 × 45 | 0.0030 | 0.0192 | 74.8 |
Item | Mesh (Wires/in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
InconelX750-1 | 38 × 36 | 0.0045 | - | 69.5 |
InconelX750-2 | 80 × 80 | 0.0055 | 0.007 | 31.4 |
FeCrAl woven wire mesh is also called FeCrAl alloy woven wire, heating resistance alloy woven wire, electro thermal alloy mesh. The raw material is woven into a continuous meshes. Except for the FeCrAl woven wire mesh, there are FeCrAl expanded metal mesh and FeCrAl perforated mesh.
FeCrAl woven wire has outstanding heating resistance, oxidation resistance performance. It is mainly used in the industry electric furnace, household appliances. It is an ideal material for heating and drying.
Item | Mesh | Wire Gauge | Aperture (mm) |
Wire Diameter (mm) |
Roll Width (m) |
Weight (kg/m2) |
---|---|---|---|---|---|---|
FeCrAl-1 | 8 (T) | 21 | 2.375 | 0.800 | 1.0 | 2.500 |
FeCrAl-2 | 8 (T) | 22 | 2.475 | 0.700 | 1.0 | 1.840 |
FeCrAl-3 | 10 (T) | 23 | 1.940 | 0.600 | 0.6 | 1.690 |
FeCrAl-4 | 12 (T) | 24 | 1.557 | 0.559 | 1.0 | 1.800 |
FeCrAl-5 | 17 (T) | 24 | 0.940 | 0.550 | 0.6 | 2.570 |
FeCrAl-6 | 20 (P) | 33 | 1.020 | 0.250 | 1.0 | 0.587 |
FeCrAl-7 | 20 (P) | 32 | 1.000 | 0.270 | 1.0 | 0.685 |
FeCrAl-8 | 20 (P) | 30 | 0.970 | 0.300 | 1.0 | 0.846 |
FeCrAl-9 | 25 (P) | 30 | 0.710 | 0.300 | 1.0 | 1.125 |
FeCrAl-10 | 30 (P) | 38 | 0.690 | 0.150 | 1.0 | 0.300 |
FeCrAl-11 | 34 (P) | 33 | 0.490 | 0.250 | 1.0 | 1.060 |
FeCrAl-12 | 40 (P) | 35 | 0.425 | 0.210 | 1.0 | 0.830 |
FeCrAl-13 | 40 (T) | 35 | 0.425 | 0.210 | 1.0 | 0.830 |
FeCrAl-14 | 44 (T) | 35 | 0.367 | 0.210 | 1.0 | 0.880 |
FeCrAl-15 | 60 (T) | 38 | 0.273 | 0.150 | 1.0 | 0.660 |
FeCrAl-16 | 80 (P) | 43 | 0.227 | 0.090 | 1.0 | 0.324 |
L605 wire cloth, also called Haynes 25 wire cloth, is a type of mesh cloth made of L605 alloy wires. The L605 wire cloth has good ductility, good oxidation and corrosion resistance as well as properties at elevated temperatures.
Haynes 25/L605 is a nonmagnetic, Cobalt-Nickel-Chromium-Tungsten alloy that combines good high temperature strength with good resistance to oxidizing environment at high temperature up to 980 °C (1795 °F) for long exposures. It has excellent resistance to sulphidation.
Item | Mesh Size | Wire Diameter | Width of Opening | Open Area | ||
---|---|---|---|---|---|---|
wire/inch | inch | mm | inch | mm | % | |
L605-1 | 12 × 12 | 0.0110 | 0.2794 | 0.0723 | 1.8364 | 75.3 |
L605-2 | 18 × 18 | 0.0170 | 0.4318 | 0.0390 | 0.9906 | 48.3 |
L605-3 | 20 × 20 | 0.0050 | 0.1270 | 0.0450 | 1.1430 | 81.0 |
L605-4 | 20 × 20 | 0.0130 | 0.3302 | 0.0370 | 0.9398 | 54.8 |
L605-5 | 20 × 20 | 0.0160 | 0.4064 | 0.0340 | 0.8636 | 46.2 |
L605-6 | 26 × 26 | 0.0130 | 0.3302 | 0.0260 | 0.6604 | 44.0 |
L605-7 | 30 × 30 | 0.0100 | 0.2540 | 0.0230 | 0.5842 | 48.9 |
L605-8 | 30 × 30 | 0.0110 | 0.2794 | 0.0220 | 0.5588 | 44.8 |
L605-9 | 30 × 30 | 0.0125 | 0.3175 | 0.0208 | 0.5283 | 39.1 |
L605-10 | 30 × 30 | 0.0130 | 0.3302 | 0.0200 | 0.5080 | 37.1 |
L605-11 | 35 × 35 | 0.0130 | 0.3302 | 0.0160 | 0.4064 | 29.8 |
L605-12 | 40 × 40 | 0.0070 | 0.1778 | 0.0180 | 0.4572 | 51.8 |
L605-13 | 40 × 40 | 0.0090 | 0.2286 | 0.0160 | 0.4064 | 41.0 |
L605-14 | 40 × 40 | 0.0100 | 0.2540 | 0.0150 | 0.3810 | 36.0 |
L605-15 | 46 × 46 | 0.0035 | 0.0889 | 0.0182 | 0.4623 | 70.4 |
L605-16 | 50 × 50 | 0.0030 | 0.0762 | 0.0170 | 0.4318 | 72.3 |
L605-17 | 50 × 50 | 0.0090 | 0.2286 | 0.1100 | 2.7940 | 30.3 |
L605-18 | 60 × 60 | 0.0055 | 0.1397 | 0.0112 | 0.2845 | 44.9 |
L605-19 | 60 × 60 | 0.0070 | 0.1778 | 0.0100 | 0.2540 | 33.9 |
L605-20 | 80 × 70 | 0.0050 | 0.1270 | 0.0000 | 0.0000 | 39.0 |
L605-21 | 80 × 80 | 0.0055 | 0.1397 | 0.0070 | 0.1778 | 31.4 |
L605-22 | 100 × 100 | 0.0025 | 0.0635 | N/A | N/A | N/A |
L605-23 | 200 × 200 | 0.0020 | 0.0508 | 0.0030 | 0.0762 | 36.0 |
Titanium woven mesh is woven from non-magnetic titanium wires and is divided into black titanium woven mesh and white titanium woven mesh by its surface color. Black titanium woven mesh is made of pure titanium wire and is suitable for manufacturing ship and seawater titanium filter mesh; white titanium woven mesh is produced by weaving pure graphite wire after removing the graphite emulsion coating. It is suitable for manufacturing electrode mesh, titanium battery collecting mesh and fine chemical liquid filtering titanium mesh.
Item | Mesh (Wires/ in.) |
Wire Diameter (in.) |
Width of Opening (in.) |
Open Area (%) |
---|---|---|---|---|
TI-1 | 4 × 4 | 0.0320 | 0.2180 | 76.0 |
TI-2 | 4 × 4 | 0.0350 | 0.2150 | 74.0 |
TI-3 | 6 × 6 | 0.0320 | 0.1350 | 65.6 |
TI-4 | 7 × 7 | 0.0250 | 0.1180 | 68.2 |
TI-5 | 8 × 8 | 0.0320 | 0.0930 | 55.4 |
TI-6 | 9 × 9 | 0.0320 | 0.0790 | 50.6 |
TI-7 | 10 × 10 | 0.0350 | 0.0650 | 42.3 |
TI-8 | 10 × 10 | 0.0300 | 0.0700 | 49.0 |
TI-9 | 10 × 10 | 0.0250 | 0.0750 | 56.3 |
TI-10 | 12 × 12 | 0.0110 | 0.0723 | 75.3 |
TI-11 | 14 × 14 | 0.0160 | 0.0550 | 60.2 |
TI-12 | 16 × 16 | 0.0060 | 0.0565 | 81.7 |
TI-13 | 18 × 18 | 0.0100 | 0.0460 | 67.4 |
TI-14 | 18 × 18 | 0.0110 | 0.0445 | 64.4 |
TI-15 | 18 × 18 | 0.0160 | 0.0400 | 50.8 |
TI-16 | 20 × 20 | 0.0030 | 0.0470 | 88.4 |
TI-17 | 20 × 20 | 0.0200 | 0.0300 | 36.0 |
TI-18 | 20 × 20 TW | 0.0160 | 0.0340 | 46.2 |
TI-19 | 24 × 24 | 0.0100 | 0.0320 | 57.9 |
TI-20 | 24 × 24 | 0.0118 | 0.0299 | 51.4 |
TI-21 | 26 × 26 | 0.0100 | 0.0290 | 54.9 |
TI-22 | 30 × 30 | 0.0100 | 0.0233 | 49.0 |
TI-23 | 32 × 32 | 0.0100 | 0.0210 | 46.5 |
TI-24 | 35 × 35 | 0.0080 | 0.0206 | 51.8 |
TI-25 | 40 × 40 | 0.0050 | 0.0200 | 64.0 |
TI-26 | 40 × 40 | 0.0100 | 0.0150 | 36.0 |
TI-27 | 50 × 50 | 0.0090 | 0.0110 | 30.3 |
TI-28 | 50 × 50 TW | 0.0040 | 0.0160 | 64.0 |
TI-29 | 60 × 60 TW | 0.0090 | 0.0077 | 21.3 |
TI-30 | 90 × 90 | 0.0040 | 0.0071 | 41.0 |
TI-31 | 100 × 100 | 0.0020 | 0.0080 | 64.0 |
TI-32 | 120 × 120 TW | 0.0040 | 0.0043 | 27.0 |
TI-33 | 150 × 150 TW | 0.0027 | 0.0040 | 35.5 |
Super duplex stainless steel woven mesh is a molybdenum-added
austenitic-ferritic-iron-chromium-nickel alloy woven wire mesh. Depending on the chemical composition of the material, super duplex stainless steel is often classified into two types: UNS32750 and UNS31803.
UNS32750 super duplex stainless steel woven mesh has good resistance performance to chloride stress corrosion, fatigue corrosion, good plasticity and weldability, durability, and high strength, etc.; UNS31803 super duplex stainless steel woven mesh has good corrosion resistance performance, yield strength, weldability, and high energy absorption.
Item | Mesh/Inch | S.W.G | Aperture (mm) |
Wire Diameter (mm) |
Open Area (%) |
Weight (kg/m2) |
---|---|---|---|---|---|---|
SDSS-1 | 3 | 14.0 | 6.2700 | 2.2000 | 62 | 7.000 |
SDSS-2 | 3 | 18.0 | 7.2500 | 1.2190 | 70 | 2.500 |
SDSS-3 | 3.5 | 20.0 | 6.3400 | 0.9140 | 66 | 1.800 |
SDSS-4 | 4 | 16.0 | 4.7200 | 1.6300 | 58 | 5.000 |
SDSS-5 | 4 | 20.0 | 5.4500 | 0.9140 | 76 | 2.100 |
SDSS-6 | 4.5 | 22.0 | 4.9300 | 0.7110 | 71 | 1.200 |
SDSS-7 | 5 | 18.0 | 3.8600 | 1.2200 | 57 | 3.600 |
SDSS-8 | 5 | 22.0 | 4.3600 | 0.7110 | 76 | 1.300 |
SDSS-9 | 6 | 18.0 | 3.0400 | 1.2200 | 50 | 4.300 |
SDSS-10 | 6 | 22.0 | 3.5200 | 0.7110 | 63 | 1.600 |
SDSS-11 | 8 | 20.0 | 2.2600 | 0.9100 | 43 | 3.200 |
SDSS-12 | 8 | 24.0 | 2.5000 | 0.5590 | 67 | 1.500 |
SDSS-13 | 10 | 20.0 | 1.6300 | 0.9100 | 41 | 4.000 |
SDSS-14 | 10 | 26.0 | 2.0800 | 0.4600 | 67 | 1.100 |
SDSS-15 | 12 | 22.0 | 1.4100 | 0.7100 | 43 | 2.900 |
SDSS-16 | 12 | 26.0 | 1.7400 | 0.4570 | 68 | 1.400 |
SDSS-17 | 14 | 26.0 | 1.3600 | 0.4600 | 57 | 1.400 |
SDSS-18 | 16 | 28.0 | 1.2100 | 0.3760 | 55 | 1.200 |
SDSS-19 | 18 | 30.0 | 1.1000 | 0.3150 | 60 | 0.850 |
SDSS-20 | 20 | 30.0 | 0.9500 | 0.3150 | 58 | 0.950 |
SDSS-21 | 22 | 32.0 | 0.8800 | 0.2740 | 57 | 0.800 |
SDSS-22 | 24 | 32.0 | 0.7800 | 0.2740 | 55 | 0.850 |
SDSS-23 | 26 | 32.0 | 0.7400 | 0.2740 | 51 | 0.700 |
SDSS-24 | 28 | 34.0 | 0.6700 | 0.2340 | 50 | 0.750 |
SDSS-25 | 30 | 34.0 | 0.6100 | 0.2340 | 48 | 0.800 |
SDSS-26 | 32 | 34.0 | 0.5600 | 0.2340 | 50 | 0.840 |
SDSS-27 | 36 | 34.0 | 0.4700 | 0.2340 | 45 | 0.950 |
SDSS-28 | 38 | 36.0 | 0.4800 | 0.1930 | 46 | 0.700 |
SDSS-29 | 40 | 36.0 | 0.4400 | 0.1930 | 50 | 0.800 |
SDSS-30 | 50 | 38.0 | 0.3600 | 0.1520 | 46 | 0.580 |
SDSS-31 | 60 | 40.0 | 0.3000 | 0.1220 | 50 | 0.450 |
SDSS-32 | 80 | 40.0 | 0.1980 | 0.1200 | 44 | 0.580 |
SDSS-33 | 100 | 42.0 | 0.1540 | 0.1000 | 37 | 0.500 |
SDSS-34 | 120 | 44.0 | 0.1300 | 0.0810 | 40 | 0.390 |
SDSS-35 | 130 | 45.0 | 0.1250 | 0.0700 | 41 | 0.325 |
SDSS-36 | 140 | 45.0 | 0.1110 | 0.0700 | 38 | 0.350 |
SDSS-37 | 150 | 46.5 | 0.1150 | 0.0550 | 48 | 0.206 |
SDSS-38 | 160 | 46.0 | 0.0970 | 0.6100 | 32 | 0.300 |
SDSS-39 | 170 | 47.0 | 0.0900 | 0.0500 | 41 | 0.213 |
SDSS-40 | 180 | 47.0 | 0.0900 | 0.0510 | 41 | 0.240 |
SDSS-41 | 190 | 47.0 | 0.0830 | 0.0510 | 40 | 0.240 |
SDSS-42 | 200 | 48.0 | 0.0860 | 0.0410 | 46 | 0.170 |
SDSS-43 | 220 | 48.0 | 0.0740 | 0.0410 | 41 | 0.190 |
SDSS-44 | 240 | 48.0 | 0.0650 | 0.0410 | 39 | 0.200 |
SDSS-45 | 250 | 48.0 | 0.0610 | 0.0410 | 38 | 0.220 |
SDSS-46 | 260 | 48.0 | 0.0570 | 0.0410 | 34 | 0.220 |
SDSS-47 | 280 | 49.0 | 0.0600 | 0.0310 | 31 | 0.140 |
SDSS-48 | 300 | 49.0 | 0.0540 | 0.0310 | 40 | 0.150 |
SDSS-49 | 320 | 49.0 | 0.0480 | 0.0310 | 39 | 0.160 |
SDSS-50 | 350 | 49.0 | 0.0420 | 0.0310 | 36 | 0.160 |
SDSS-51 | 400 | 50.0 | 0.0385 | 0.0250 | 39 | 0.013 |
SDSS-52 | 450 | 50.0 | 0.0314 | 0.0250 | 37 | 0.140 |
SDSS-53 | 500 | 50.0 | 0.0258 | 0.0250 | 35 | 0.156 |
Silver woven mesh is an exquisite wire mesh woven from 99.99% pure silver wire.
Compared with wire mesh woven from other metal alloys, silver woven mesh has good electrical and thermal conductivity, so it is commonly used in battery collector grids, electrodes, and battery skeleton mesh, as well as filter materials in high-precision equipment. In addition, silver woven wire mesh can also be used to design decorative items to add a distinctive charm to your project.
Item | Mesh | Wire Diameter | Opening | Open Area | ||
---|---|---|---|---|---|---|
inch | mm | inch | mm | % | ||
Silver-1 | 20 mesh | 0.014 | 0.35 | 0.036 | 0.91 | 51.8 |
Silver-2 | 20 mesh | 0.009 | 0.23 | 0.041 | 1.04 | 67.2 |
Silver-3 | 24 mesh | 0.014 | 0.35 | 0.028 | 0.71 | 44.2 |
Silver-4 | 28 mesh | 0.010 | 0.25 | 0.026 | 0.66 | 51.8 |
Silver-5 | 30 mesh | 0.011 | 0.28 | 0.022 | 0.55 | 44.8 |
Silver-6 | 30 mesh | 0.007 | 0.16 | 0.027 | 0.68 | 64.8 |
Silver-7 | 35 mesh | 0.012 | 0.30 | 0.017 | 0.43 | 33.8 |
Silver-8 | 35 mesh | 0.010 | 0.25 | 0.019 | 0.48 | 42.4 |
Silver-9 | 40 mesh | 0.010 | 0.25 | 0.015 | 0.38 | 36.0 |
Silver-10 | 40 mesh | 0.010 | 0.24 | 0.016 | 0.40 | 38.4 |
Silver-11 | 50 mesh | 0.009 | 0.23 | 0.011 | 0.28 | 30.3 |
Silver-12 | 50 mesh | 0.008 | 0.20 | 0.012 | 0.30 | 36.0 |
Silver-13 | 60 mesh | 0.008 | 0.19 | 0.009 | 0.22 | 30.5 |
Silver-14 | 60 mesh | 0.006 | 0.15 | 0.011 | 0.28 | 40.2 |
Tantalum woven mesh is a fine wire mesh made of rare metal tantalum wire. Tantalum has a higher melting point and lower density, as well as good ductility, chemical stability, better acid and alkali resistance performance, and filtration properties, which make Tantalum woven mesh an ideal material for use in electronic engineering and heat treatment technology. Tantalum woven mesh not only offers excellent performance and reliable durability, but also has a beautiful appearance, making it an excellent high-end material.
Item | mesh | Wire Diameter | Weaving Type | Mesh Opening | Open Area | ||
---|---|---|---|---|---|---|---|
inch | mm | inch | mm | ||||
Tan-1 | 8 × 8 | 0.0200 | 0.5080 | Plain | 0.1050 | 2.6670 | 70.6 |
Tan-2 | 14 × 14 | 0.0160 | 0.4064 | Plain | 0.0554 | 1.4072 | 60.2 |
Tan-3 | 30 × 30 | 0.0030 | 0.0762 | Plain | 0.0303 | 0.7696 | 82.8 |
Tan-4 | 35 × 35 | 0.0078 | 0.1981 | Twill | 0.0208 | 0.5283 | 52.9 |
Tan-5 | 50 × 50 | 0.0030 | 0.0762 | Plain | 0.0170 | 0.4318 | 72.3 |
Tan-6 | 80 × 80 | 0.0030 | 0.0762 | Plain | 0.0095 | 0.2413 | 57.8 |
Tan-7 | 100 × 100 | 0.0030 | 0.0762 | Twill | 0.0070 | 0.1778 | 49.0 |
Tan-8 | 8 × 8 | 0.0280 | 0.7100 | Plain | 0.0970 | 2.4650 | 60.2 |
Tan-9 | 10 × 10 | 0.0252 | 0.6400 | Plain | 0.0748 | 1.9000 | 55.9 |
Tan-10 | 12 × 12 | 0.0228 | 0.5800 | Plain | 0.0605 | 1.5370 | 58.9 |
Tan-11 | 14 × 14 | 0.0165 | 0.4200 | Plain | 0.0547 | 1.3900 | 59.0 |
Tan-12 | 16 × 16 | 0.0150 | 0.3800 | Plain | 0.0476 | 1.2100 | 57.9 |
Tan-13 | 18 × 18 | 0.0157 | 0.4000 | Plain | 0.0398 | 1.0100 | 51.3 |
Tan-14 | 20 × 20 | 0.0157 | 0.4000 | Plain | 0.0343 | 0.8700 | 46.9 |
Tan-15 | 24 × 24 | 0.0106 | 0.2700 | Plain | 0.0310 | 0.7880 | 55.4 |
Tan-16 | 28 × 28 | 0.0091 | 0.2300 | Plain | 0.0267 | 0.6770 | 55.7 |
Tan-17 | 30 × 30 | 0.0110 | 0.2800 | Plain | 0.0223 | 0.5670 | 44.8 |
Tan-18 | 35 × 35 | 0.0130 | 0.3300 | Plain | 0.0156 | 0.3960 | 29.7 |
Tan-19 | 40 × 40 | 0.0098 | 0.2500 | Plain | 0.0152 | 0.3850 | 36.7 |
Tan-20 | 50 × 50 | 0.0063 | 0.1600 | Plain | 0.0150 | 0.3810 | 36.0 |
Tan-21 | 60 × 60 | 0.0063 | 0.1600 | Plain | 0.0104 | 0.2630 | 39.0 |
Tan-22 | 80 × 80 | 0.0047 | 0.1200 | Plain | 0.0078 | 0.1980 | 39.0 |
Tan-23 | 100 × 100 | 0.0039 | 0.1000 | Plain | 0.0061 | 0.1540 | 37.0 |
Tan-24 | 120 × 120 | 0.0031 | 0.0800 | Plain | 0.0052 | 0.1320 | 38.7 |
Tan-25 | 150 × 150 | 0.0024 | 0.0600 | Plain | 0.0043 | 0.1090 | 41.5 |
Tan-26 | 200 × 200 | 0.0020 | 0.0500 | Plain | 0.0030 | 0.0770 | 36.7 |
Tan-27 | 300 × 300 | 0.0014 | 0.0350 | Plain | 0.0019 | 0.0490 | 34.4 |
Item | Mesh Size (wire/inch) |
Wire Diameter | |
---|---|---|---|
inch | mm | ||
DTan-1 | 12 × 64 | 0.0228/0.0157 | 0.580/0.400 |
DTan-2 | 24 × 110 | 0.0142/0.0098 | 0.360/0.250 |
DTan-3 | 14 × 88 | 0.0197/0.0130 | 0.500/0.330 |
DTan-4 | 14 × 110 | 0.0157/0.0106 | 0.400/0.270 |
DTan-5 | 30 × 150 | 0.0071/0.0055 | 0.180/0.140 |
DTan-6 | 40 × 200 | 0.0055/0.0043 | 0.140/0.110 |
DTan-7 | 50 × 250 | 0.0039/0.0028 | 0.100/0.071 |
DTan-8 | 80 × 700 | 0.0024/0.0020 | 0.060/0.050 |
DTan-9 | 165 × 800 | 0.0028/0.0016 | 0.071/0.040 |
DTan-10 | 165 × 1400 | 0.0020/0.0013 | 0.050/0.032 |
DTan-11 | 200 × 1800 | 0.0020/0.0012 | 0.050/0.030 |
DTan-12 | 325 × 2300 | 0.0012/0.0010 | 0.030/0.025 |
DTan-13 | 400 × 2800 | 0.0012/0.0008 | 0.030/0.020 |
Nickel-chromium alloy woven mesh is usually classified into three types, Cr20Ni80, Cr15Ni60, and Cr20Ni35, according to its chemical composition. Among them, Cr20Ni80 is suitable for electric furnaces, radiant heaters, and other industries; Cr15Ni60 is suitable for electric heating, industrial resistance devices, acid dipping baskets, filter cloths, etc. While Cr20Ni35 is suitable for sulfur, lead, or zinc pollution of the atmosphere.
Item | Mesh | Wire Diameter | Width of Opening | Open Area |
---|---|---|---|---|
inch | inch | inch | % | |
Nichrome-1 | 4 × 4 | 0.0630 | 0.1870 | 56.0 |
Nichrome-2 | 8 × 8 | 0.0470 | 0.0780 | 38.9 |
Nichrome-3 | 8 × 8 | 0.0250 | 0.1000 | 64.0 |
Nichrome-4 | 10 × 10 | 0.0350 | 0.0650 | 42.3 |
Nichrome-5 | 16 × 16 | 0.0200 | 0.0430 | 46.2 |
Nichrome-6 | 20 × 20 | 0.0200 | 0.0300 | 36.0 |
Nichrome-7 | 20 × 20 | 0.0130 | 0.0370 | 54.8 |
Nichrome-8 | 20 × 20 | 0.0160 | 0.0340 | 43.2 |
Nichrome-9 | 26 × 26 | 0.0130 | 0.0260 | 44.0 |
Nichrome-10 | 40 × 40 | 0.0100 | 0.0150 | 36.0 |
Nichrome-11 | 40 × 40 | 0.0070 | 0.0180 | 51.8 |
Nichrome-12 | 80 × 80 | 0.0055 | 0.0070 | 31.4 |
Nichrome-13 | 200 × 200 | 0.0021 | 0.0029 | 33.6 |
Nichrome-14 | 325 × 325 | 0.0014 | 0.0017 | 29.7 |
Aluminum woven wire mesh is a fine mesh woven of silver-white aluminum wire. Its properties depend on the diameter and weave of aluminum wires, such as strength, flexibility, corrosion resistance performance, and load-bearing capacity. This mesh material is not only lightweight and compact, but also has excellent properties such as high temperature and corrosion resistance performance, which makes it widely used in cutting-edge equipment, automobiles, airplanes, and foodstuffs. The beautiful appearance and excellent performance of aluminum woven mesh can bring unique value to your project.
Item | Mesh | Wire Diameter | Aperture | Open Area | ||
---|---|---|---|---|---|---|
inch | inch | mm | inch | mm | % | |
Aluminum-1 | 1 × 1 | 0.0800 | 2.0300 | 0.9200 | 23.3700 | 84.6 |
Aluminum-2 | 2 × 2 | 0.0630 | 1.6000 | 0.4370 | 11.1000 | 76.4 |
Aluminum-3 | 3 × 3 | 0.0540 | 1.3700 | 0.2790 | 7.0900 | 70.1 |
Aluminum-4 | 4 × 4 | 0.0630 | 1.6000 | 0.1870 | 4.7500 | 56.0 |
Aluminum-5 | 5 × 5 | 0.0410 | 1.0400 | 0.1590 | 4.0400 | 63.2 |
Aluminum-6 | 10 × 10 | 0.0250 | 0.6400 | 0.0750 | 1.9100 | 56.3 |
Aluminum-7 | 24 × 24 | 0.0140 | 0.3560 | 0.0277 | 0.7000 | 44.2 |
Aluminum-8 | 80 × 80 | 0.0055 | 0.1400 | 0.0070 | 0.1800 | 31.4 |
Aluminum-9 | 90 × 90 | 0.0050 | 0.1270 | 0.0061 | 0.1600 | 30.1 |
Aluminum-10 | 100 × 100 | 0.0035 | 0.0890 | 0.0065 | 0.1700 | 42.3 |
Aluminum-11 | 120 × 120 | 0.0037 | 0.0940 | 0.0064 | 0.1168 | 30.7 |
Aluminum-12 | 160 × 160 | 0.0025 | 0.0635 | 0.0038 | 0.0965 | 36.4 |
Aluminum-13 | 200 × 200 | 0.0021 | 0.0533 | 0.0029 | 0.0737 | 33.6 |
Item | Mesh Per Inch (Longitude × Latitude) |
Wire Diameter (Longitude × Latitude) |
Aperture Reference Value | Effective Rate of Cross Section | Thickness of Mesh |
---|---|---|---|---|---|
– | mm | μm | % | mm | |
AluminumD-1 | 7 × 40 | 0.900 × 0.710 | 347 | 14.3 | 2.320 |
AluminumD-2 | 7 × 44 | 0.710 × 0.630 | 319 | 14.2 | 1.970 |
AluminumD-3 | 8 × 45 | 0.800 × 0.600 | 310 | 15.5 | 2.000 |
AluminumD-4 | 14 × 76 | 0.450 × 0.355 | 173 | 14.3 | 1.160 |
AluminumD-5 | 16 × 100 | 0.400 × 0.280 | 160 | 17.7 | 0.960 |
AluminumD-6 | 20 × 110 | 0.355 × 0.250 | 126 | 15.3 | 0.855 |
AluminumD-7 | 22 × 120 | 0.315 × 0.224 | 115 | 15.5 | 0.763 |
AluminumD-8 | 24 × 110 | 0.355 × 0.250 | 97 | 11.3 | 0.855 |
AluminumD-9 | 28 × 150 | 0.280 × 0.180 | 92 | 15.9 | 0.640 |
AluminumD-10 | 35 × 170 | 0.224 × 0.160 | 69 | 12.8 | 0.544 |
AluminumD-11 | 40 × 200 | 0.180 × 0.135 | 63 | 15.4 | 0.430 |
AluminumD-12 | 50 × 300 | 0.160 × 0.090 | 55 | 20.0 | 0.340 |
AluminumD-13 | 60 × 500 | 0.140 × 0.055 | 51 | 34.1 | 0.252 |
AluminumD-14 | 80 × 430 | 0.125 × 0.063 | 32 | 16.6 | 0.251 |
AluminumD-15 | 100 × 120 | 0.063 × 0.023 | 23 | 37.6 | 0.109 |
AluminumD-16 | 118 × 750 | 0.063 × 0.036 | 23 | 21.5 | 0.135 |